Model 3/Y HEPA N98 Activated Carbon Air Filter
A Fresh Filter for Fresh Air
The TEMAI dedicated Model 3/Y N98 cabin air filter has a state-of-the-art honeycomb mesh design. This creates less wind resistance giving a N98 HEPA filtration level and tighter seal.
The TEMAI PM2.5 filter efficiently purifies odors, dust, pollen, particles, hair, and secondhand smoke. Leaving the fresh air in the car.
- Four-layer Filtration
- N98 and HEPA Class 11 Levels Filters
- Heavy-duty Absorption Levels
Wind Resistance and Ventilation Throughput
Because the TEMAI filter has such low wind resistance, ventilation efficiency increases by 90%
The Four Layered Filter
A four layered filter element is more efficient than other competing filters on the market. TEMAI’s filter can successfully achieve N98 levels. The filter also adds a blue extra adsorption layer. It is anti-drying.
With the addition of the PM2.5 HEPA 11 layer of the filter, the driver and family remain safe against respiratory diseases caused by air pollution.
Dust Filter Layer
This fine mesh layer filters out dirt, dust. Preventing the initial intrusion of foreign objects into the vehicle.
Honeycomb Carbon Composite Layer
This sticky and high-quality coal-like activated carbon layer removes harmful substances such as formaldehyde, TVOC, and smells within the vehicle.
HEPA Filter Layer
This layer effectively filters out pollen, smoke, dust.
Extra Adsorption Layer
This extra adsorption blue layer filters anything that may have made it through the other three layers. This layer protects your family’s health as a last precaution.
- Removes Formaldehyde
- Removes Toluene
- Removes Haze
- Removes Odor
- Removes Second-hand Smoke
After thorough testing of wind resistance, results show that the air output of the TEMAI air filter is far superior to the stock Model 3/Y air filter.
With the original filter element installed, the wind resistance is detected at 1.0234bft
In the same indoor environment, the wind resistance detected from the TEMAI filter is 1.946. The wind force from the vent is a stronger and cleaner air, almost doubling the output.
The PM2.5 filtering reaches 98.4% and has no odor.
After replacing the filter with the TEMAI brand and measuring the air quality, the formaldehyde and TVOC concentration in the car are both <0.01mg/m³, which is far below the standard of 0.08mg/m³. This lower level protects pregnant women, children and avoids exacerbation of respiratory problems.
High-end Precision Craftsmanship
The size of the TEMAI filter is the exact same as the original air conditioner filter element. The TEMAI filter is customized for the Model 3/Y, is easy to install, and is as simple as removing the old filter and replacing it directly.
Not only does the filter improve the air quality in the car, but also cleans up odorous dirt and grime which could have a lasting impact on the vehicle.
The Honeycomb Sticky Carbon Conformity Net
The honeycomb purification system reinforces the strength of the filter screen.
The incorporation of non-deformable activated carbon is evenly distributed throughout the honeycomb screen. Covering all 360 degrees of total airflow passing through, the activated carbon increases the absorption strength of harmful air pollutants, and odors. The uniform distribution of the activated carbon also increases the amount of space available to filter the air.
High-quality Coal Columnar Activated Carbon
Using incorporated activated carbon particles for physical absorption, and chemical decomposition, the efficiency of the TEMAI carbon filter element is 5 times greater than that of an ordinary filter.
HEPA 11 Class Filter
The HEPA 11 filter screen is a high-density pleated filter paper. It has a dense, intertwined design which effectively reduces wind resistance, and increase air intake at the same time. The more it is used, the drier it becomes, which prevents moisture. The absorption capacity of PM2.5 particles is as high as 98.4%. This is more effective in filtering dust, pollen, particles, hair, and secondhand smoke.
Extra Adsorption Layer
The TEMAI filter element has a separate blue adsorption layer. This layer has a 99.04% elimination rate. At the same time, it is anti-drying.
Padded and Tight Sealing Ring
The TEMAI filter element is equipped with a sponge sealing ring. This ring has excellent sealing capabilities. Having a tight seal prevents shifting of the filter element while simultaneously protecting unfiltered air entry and filtered air exit.
A hard frame surrounds the edge of the filter. This frame also has a tight fit to the filter which blocks filter air leakage and the intrusion of unfiltered air. The frame also avoids deformation of the filter during installation if excessive force is used.
Easy Installation Ribbon Handle
Ribbon portable for easy installation
The corners of the filter element have a ribbon handle which allows for convenient carrying, hanging, and to aid in replacing the filter. This ribbon makes removing an old filter element quick and easy.
The TEMAI filter element surpasses all benchmarks for filtration, air output and quality clean air that will keep the riders safe and healthy for every trip.
No more worrying about unforeseen ailments in the air, the TEMAI filter will allow you focus on driving while having peace of mind about the fresh air you breathe in.
In the box
2x Air filters
1x T20 torx driver for Model 3
1x 1/4" drive (6mm hex metric socket) for Model Y
1x Removal tool
1x Installation instruction
|Product name||Model 3/Y HEPA Activated N98 Grade Carbon PM2.5 Air Filter|
|Product weight||475 gram|
|Product size||9.6x5.6x1.18 inches|
|Compatibility||Model 3 and Model Y|
the filters shipped very quickly and arrived well packaged at my house. The installation process is a breeze with the pushpin removal tool that was provided. Could tell the air qualify difference immediately. Will buy again when the tie comes.
This is a perfect product, it gave me increased airflow. They look and feels like quality filters. Two thumbs up!
Great product and great instruction to install
Honestly I’m padding that number. It was more like a 10 minute install. Super easy, great filtering product. No issues with it at all. The Elon Musk scent is gone 😊. Thank you!!!
changing the air filters solved the smell problem we had coming from the vents. Watching the video with how to remove the inside panels was extremely helpful. it took me approximately 20 minutes from start to finish. I would recommend using a 6mm socket, it made removing the filter cover much easier.
Way better than the OE filters.
Have improved air quality in my Tesla.
Fit easily into the opening. Good airflow.The tools that came with The kit were very useful. I am very happy with the filters.